Sichuan Basin Xujiahe Formation Shale Rock 3D Microstructures

Tools Click here to view this collection in the new DAP user interface

show summary fields  |   show all    

About this Collection

Sichuan Basin Xujiahe Formation Shale Rock 3D Microstructures

The data is related to a sample from a Triassic shale oil reservoir, the fifth member of the Xujiahe Formation from the Sichuan Basin in southern China. The data set include the following: X-ray projection images, plus flate-field and dark-field images Reconstructed CT slices DCM characterized and threshold segmentated composition and porosity imag... more

Geophysics not elsewhere classified

17 Oct 2012

17 Sep 2013

CSIRO Enquiries
1300 363 400

3D microstructure porosity shale rock reservoir resources

Data acquired at Shanghai Synchrotron Radiation Facility (SSRF) BL13W beamline by Yudan Wang of SSRF. Sensor was PCO-2000 CCD optically coupled to a scintillator with an Optique Peter camera, with an effective pixel size of 0.74 microns. Tomographic datasets were acquired at 20keV and 30keV. 1080 views were acquired for each dataset over a 180 degree rotation with 3s exposure per view. Flat-field images were obtained with X-ray beam turned on with the sample not in the FOV for every ten degrees during the sample scanning. The dark-field images were acquired after the sample scan with the X-ray beam turned off. Sample to detector distance was 23cm to enhance phase-contrast to improve signal to noise ratio. Data were processed and reconstructed using the X-TRACT software. Data was pre-processed with background correction, and phase-retrieval was used to eliminate the phase-contrast effect on reconstructed linear absorption coefficients. Parallel beam reconstruction was carried out using a filtered-back-projection algorithm. The Trim-CT slices have been analysed using the DCM software. The CT slices are analysed using the DCM linear optimisation module. The input density of quartz and calcite are 2.65g/cm3 and 2.71g/cm3, respectively. By averaging over the 600 slices, the calculated void volume fraction (porosity) is 6.4%, the volume fraction for the calcite phase is 76.9%, and for the quartz phase it is 16.7%. The Trim-CT slices of 30keV have been analysed using conventional segmentation method. For purpose of comparison with the DCM method, a threshold value is selected so that it is producing a similar overall porosity as from DCM. By averaging over the 600 slices, the calculated void volume fraction (porosity) is 6.3%.

Yudan Wang [a], Sam Y. S. Yang [b*], Keyu Liu [c, d], Yuqi Ren [a], Hai Tan [a], Tiqiao Xiao [a*] [a]: Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China [b]: CSIRO Materials Science & Engineering, Private Bag 33, Clayton, Vic 3169, Australia [c]: CSIRO Earth Science & Resource Engineering, P.O. Box 1130, Bentley, WA 6102, Australia [d]: RIPED, PetroChina, 20 Xueyuan Rd, Beijing 100083, China

Creative Commons Attribution 3.0 Unported Licence

CSIRO (Australia), Shanghai Synchrotron Radiation Facility (Australia)

Wang, Yudan; Yang, Sam; Liu, Keyu; Ren, Yuqi; Tan, Hai; Xiao, Tiqiao (2013): Sichuan Basin Xujiahe Formation Shale Rock 3D Microstructures. v1. CSIRO. Data Collection.

All Rights (including copyright) CSIRO Australia, Shanghai Synchrotron Radiation Facility 2013.

The metadata and files (if any) are available to the public.

show all

Location Details

34°0′0″ N

26°0′0″ N

110°0′0″ E

98°0′0″ E


About this Project

Data Constrained Materials C2011/6428

The objective of the project is to develop a data-constrained modelling methodology and software implementation to advance CSIRO's capability in quantitative 3D characterisation of materials microstructures and their bulk properties. Benchmark case studies are conducted in collaboration with CSIRO impact Flagships and Themes to elevate the impact C... more

Sam Yang

Data-constrained modelling (DCM)

Data-constrained characterisation of materials microstructures and performance properties by incorporating quantitative multi-energy X-ray CT in a generic statistical mechanical modelling framework.


Yudan Wang

Sam Yang

Keyu Liu

Yuqi Ren

Hai Tan

Tiqiao Xiao

Similar collections

  • Erdors Basin Yanchang Formation Tight Sandstone 3D Microstructures....
  • Multi-scale analysis of mineral and porosity distributions in 3D for a heterogeneous Junger Basin shale....

Others were also interested in

  • Visualization of the hydrogen atom wave functions....
  • Erdors Basin Yanchang Formation Tight Sandstone 3D Microstructures....
  • DCM plugin for partially percolating LBM single phase flow....
  • DCM - A Software Platform for Advanced 3D Materials Modelling, Characterisation and Visualization....