CCS - MV Bluefin 2017 V01 fCO2

Tools Click here to view this collection in the new DAP user interface

show summary fields  |   show all    

About this Collection

CCS - MV Bluefin 2017 V01 fCO2

A General Oceanics model 8050 fCO2 analyser was installed in the carbon team’s container and measured seawater from the ship’s auxiliary seawater pump for the duration of the voyage. Component sensors: Sensor | Make Model | Calibration Non-dispersive infra-red CO2 analyser | Licor | LI-7000 | Continuous (see below) Equilibrator temp... more

Chemical Oceanography Physical Oceanography

14 Dec 2017

19 Dec 2017

CSIRO Enquiries
1300 363 400

CO2 Licor

Gippsland Monitoring Network (GipNet) - ng-network/ ANLEC R&D -

CSIRO Data Licence

CSIRO (Australia)

Tilbrook, Bronte; Akl, John; Neill, Craig; Van Ooijen, Erik (2018): CCS - MV Bluefin 2017 V01 fCO2. v1. CSIRO. Data Collection.

All Rights (including copyright) CSIRO 2018.

Access to this collection's metadata and/or files (if any) are restricted until 31 Dec 2025. Although the associated metadata is public, the files (if any) have not been approved for general release. Please phone or email the contact person for this collection to discuss access to the files.

show all

Location Details

38°11′24.72″ S

38°19′41.52″ S

147°28′45.12″ E

147°19′42.96″ E


More about this Collection


Bluefin 2017 voyage 01

Geoscientific Information

DIGITAL - Spreadsheets - MS Excel
DIGITAL - Text Documents - ASCII0

OrganisationIndividual NamePositionRoleContact Information
CSIRODirk SlawinskiSenior Experimental



14-6-2018 12:54:26

19-6-2018 05:42:06

About this Project

Assessment of MMV methodologies for subsea CCS: seabed and water column monitoring

Project Overview: A range of solutions will be required to reach globally agreed emissions reductions targets for carbon dioxide (CO2). Carbon capture and storage (CCS) is part of the suite of technologies that will contribute to lowering atmospheric emissions of CO2 from Australia's energy system. There are a wide variety of technologies at var... more

Andrew Ross

fCO2 observation

The instrument was configured in continuous flow mode with a measurement interval of 30 seconds. Seawater fCO2 measurements are interrupted for about 22 minutes every 4 hours for analysis of calibration gases and atmospheric air.


Licor | LI-7000, Hart-Fluke | 1521

Bronte Tilbrook

John Akl

Craig Neill

Erik Van Ooijen

Similar collections

  • CCS - MV Bluefin 2017 V01 TCO2 and TA....
  • CCS - MV Bluefin 2017 V01 SST....
  • CCS - MV Bluefin 2017 V01 TSG....
  • CCS - MV Bluefin 2017 V01 Oxygen....

Others were also interested in

  • CCS - MV Bluefin 2017 V01 Methane....
  • CCS - CCS_SS_04 Mooring data MAY 2018 deployment....
  • CCS - Saildrone SD1008 2019 V1....
  • CCS - MV Bluefin 2017 V01 SST....