Click here to view this collection in the new DAP user interface
CCS - CCS2 Mooring data May 2020 deployment
Project Overview: A range of solutions will be required to reach globally agreed emissions reductions targets for carbon dioxide (CO2). Carbon capture and storage (CCS) is part of the suite of technologies that will contribute to lowering atmospheric emissions of CO2 from Australia's energy system. There are a wide variety of technologies at variou... mores stages of technical and commercial readiness, with more development underway for cost effective CO2 capture and storage. Our research will provide new knowledge to inform cost-efficient measurement, monitoring and verification (MMV) of the environment of CCS projects in coastal waters.
Measurements are made Seabird Seaphox (for dissolved oxygen, pH, Seawater Temperature and Salinity), mounted on a lander. The Seaphox takes a reading every hour in the UTC hour and is transmitted real time through acoustic and/or 3G modems. The Seaphox consists of a SeaFET (pH) and SBE-37-SMP-ODO CTD (SW temperature, Salinity and Dissolved Oxygen [SBE63]).
Relevant component details: make, model, serial number, firmware version, settings:
Sensor | Make | Model | Serial Number | Calibration
pH, DO,T and S sensor | Seabird Seaphox | SeaFET | 1031 |2019-04, factory calibrated
pH, DO,T and S sensor | Seabird Seaphox | SBE-37-SMP-ODO | 15559 | 2019-04, factory calibrated
pH, DO,T and S sensor | Seabird Seaphox | SBE-63 | 1689 | 2019-04, factory calibrated
Calibration Information (if applicable)
SBE 37 (T, S, DO) and the SeaFET (pH) are calibrated by the factory and verified in the CSIRO laboratory. The pH reported in the files is flagged questionable for the pre-deployment calibrated data due to possible calibration changes which can occur after deployment
pH (calibrated) is further processed after the recovery using in situ bottle sample where available, using Total Alkalinity (TA) and Dissolved Inorganic Carbon (DIC), which will be converted to pH using CO2SYS, where the Lueker k1k2 dissociation constant is used.
Location: 38.2588333S 147.4220333E less
18 Nov 2019
25 Aug 2020
CSIRO Data Licence
Van Ooijen, Erik (2020): CCS - CCS2 Mooring data May 2020 deployment. v1. CSIRO. Data Collection.
All Rights (including copyright) CSIRO 2020.
Access to this collection's metadata and/or files (if any) are restricted until 31 Dec 2025. Although the associated metadata is public, the files (if any) have not been approved for general release. Please phone or email the contact person for this collection to discuss access to the files.
Assessment of MMV methodologies for subsea CCS: seabed and water column monitoring
Marine monitoring methodologies for subsea CCS in Bass Strait
host of moored sensors
Erik Van Ooijen